2"x60' Black Felt Border
Product Description
After receiving many questions about how to make a black, light-absorbing border for a screen, and after finding out how hard it can be to make one, I decided that I needed to offer a solution. So, I had these strips custom made to make the task a little easier for everybody.
Take a look at the picture comparing this material with the standard material I have always used as a border, and notice how much better it works for absorbing any light that bleeds off the edge of the screen.
When you order this product you will receive a 60' roll of 2" wide felt strip with an adhesive backing for easy application. All you have to do is cut the material to the length you need, peel the back off the adhesive, and stick it into place. Can it get much easier?
Take a look at the picture comparing this material with the standard material I have always used as a border, and notice how much better it works for absorbing any light that bleeds off the edge of the screen.
When you order this product you will receive a 60' roll of 2" wide felt strip with an adhesive backing for easy application. All you have to do is cut the material to the length you need, peel the back off the adhesive, and stick it into place. Can it get much easier?
You may also be interested in the following product(s)
|
9x16 Projector Screen Material
$74.95
|
9x12 Projector Screen Material
$54.99
|
5x9 Projector Screen Material
$24.99
|
6.75x9 Projector Screen Material
$29.99
|
