This product is intended for customers who want the ability to use a kit as either a Hanging or a Standing Kit. For example, some customers buy a Hanging Kit and later decide to upgrade to a Standing Kit (or vice versa) by purchasing these additional fittings.
These are just the fittings for you if you're looking for specialized pieces made of strong, structural, electroplated steel and are designed to be used with 1" EMT pipes (Electrical Metal Tubing/Conduit). Note, the EMT is not included but is simple to pick up at a local hardware store and can typically be cut to size.
If you're looking for more step-by-step DIY kit, the specs tab references the fittings included in each one of our complete kits.
This item does not come with instructions, if you do not already own a finished edge screen we recommend our Hanging Projector Screen Kit, Standing Projector Screen Kit, or Rear Projector Screen Truss Style Hanging Kit instead, complete with instructions that detail the exact number and length of pipes needed as well as how to assemble your kit.
This item is for fittings only, and is not a complete kit.
You own (or about to purchase) a Standing Kit and you also want the ability to use it as a Hanging Kit.
From Standing— To Hanging Kit
- The 5x9 and 6.75x9 will require an additional: (4) FL Fittings
- The 6.75x12, 9x12 & 9x16 will NOT require any additional fittings; use your existing (4) FL Fittings and (2) FT
- The 9x21 will NOT require any additional fittings; use your existing (4) FL Fittings and (4) FT
You own (or about to purchase) a Hanging Kit and you also want the ability to use it as a Standing Kit.
From Hanging— To Standing Kit
- The 5x9 and 6.75x9 will require an additional: (4) F4 Fittings, (2) P3DW, (1) P4CL, (1) P4CR, (1) P4EL and (1) P4ER
- The 6.75x12, 9x12 & 9x16 will require an additional: (4) F4 Fittings, (2) P3DW, (1) P4EL and (1) P4ER
- The 9x21 will require an additional: (5) F4 Fittings, (1) FT, (2) P3DW, (1) P4EL, (1) P4ER and (1) P5E
- The 6x10.5, 8x10.5, 10.5x18, 10x24.5 and the 13.5x24 are not currently available in a Standing Kit.
- The center post is a 90° angle on Fittings F4 and F5.
- The center post is angled approximately 12° to the left on Fitting P4CL and P4EL.
- The center post is angled approximately 12° to the right on Fitting P4CR and P4ER.
- The center post is angled approximately 12° on Fittings P5E and P4DW.
Find the Perfect Screen
Need help finding a screen? Carl's Place has solutions for nearly any application!